Monday 12 August 2013

Process for Anti-Termite Treatment

Anti-termite Treatment
Possessions continuation plays an essential location in overcoming hassles at homes which or else would have an unfavorable crash on the residents' valuable hours. What are the specific areas that need magazine preservation to make sure a hassle-free existence in a residence composite? Here are a few tips.

Wall Cracks
Cracks may materialize in the wall in original years of profession, due to the following reasons as per I.S. Code in the inner and the outside plaster, due to dampness changes, Thermal variations, stretchy deformation, creep, chemical response, basis group and settlement of soil, vegetation, and earthquake. Do not panic. The process of cracks may continue for the first pair of years. After that you can essentially fill the cracks with primer putty and repaint the walls and observe them stay that way.

Door and Latches
After a stage of time, you may find that the doors in your residence do not shut correctly and the latches no longer seem to work totally. This happens since of self-weight of the doors combined with temperature fluctuations and also the growth and reduction of wood causes a shift (usually downward) from the unique positions of the doors. Your are advised to wait till the period changes and watch things fall back into place, or if necessary, you can call a carpenter, who will rectify the difficulty as a precautionary calculate, hinges of doors should be oiled frequently, at least once in three months.

Flooring
The ceramic tile/ vitrified/ granite flooring should be cleaned occasionally with detergent diluted liquid. Do not use acids, ever. Corners and skirting should also be cleaned occasionally to keep them looking as good as new. To decrease the dust accretion problem at skirting level, make all skirting flush to the wall.

Damp Patches
In the first monsoon, damp patches and resulting cracks may materialize in the walls, due to seepage. This is not a main difficulty. You are advised to wait for the summer before patching the damp spots, filling the cracks and repainting the walls and the problem will not surface again. It is sensible to repaint the complete building from inside and outside after every three to five years.

Leakage
After a period of time due to regular practice, it is usual that the washers in the taps may get worn out, leading to leaky taps. You can explain this problem by just replacing the washers, even by physically. If cracks build up in kitchen sink or joints of glazed tiles, leading to seepage, instantly away fill the same with materials such as M-Seal White or any other cementing material accessible in the market. Do not use strong acids to clean bathrooms and toilets, as this will cause leakage and damage to the floor. If the traps below the pipes of the wash basin or bathroom or kitchen sink are choked, get it cleaned straight away by the plumber. Otherwise it will lead to leakages in the joints or dirty water overflowing from the bathroom traps. You can use 'Dranex' or an alike product to clean the blocked area. The leaking water taps should be attended to straight away, to avoid loss of water and injure to the housing unit below. Every apartment building owner should clean all spouts and rain water pipes just before the rainy season starts, so that water collection in the balcony and terrace will not take place. Please check all taps are closed before locking your apartment, as water may get flooded in the kitchen and other rooms, spoiling the furniture and the paint finish of the flat below.

Termite Attack
Think of anti-termite treatment as an indemnity against termites. No home, however old or new, and no material, whether existing, wood, brick, or slab is safe from termites. There is no such thing accessible as termite proof structure. We have taken sufficient precautions to avoid termite attacks, by providing the essential treatment prior to laying the basis of each building, but even high excellence furniture, fabric, books, documents and plastic padding, supply a convenient alternate for natural food for termites. Hence, it is sensible to have anti-termite action (pest control) done to your equipment, every year.

Elevator
Stuck in an elevator? Don't fret for crisis exit. There is an alarm button inside the lift, which has to be pressed. Once activated, the alarm is heard outside, alerting safety employees. Confirm at what floor level the lift is stuck. If the lift is stuck among two floors since of power breakdown or any other basis, a trained person has to put off the 3 phase major button moreover from the meter room at the ground floor or lift mechanism room on the 9th floor, and substantiate to the others concerned in the rescue practice that the power is switched off. Once the main switch is put off, there is a device called 'brake releaser' which is nearby in the lift machine room on the 9th floor. With this, you can get the lift also up or down to the adjacent landing height. Once the lift reaches the adjacent landing, the lift door's unlocking device (keys) is available with the safety staff to release any of the lift doors. For your expediency, all these instructions can be displayed inside the lift mechanism room. As a defensive measure, residence friendship office bearers should train an accountable person/ security person about the operations.

Choking of Plumbing Lines
·                     Sewerage / Silage Lines: By throwing non-degradable items (sanitary-napkins, solid waste, etc.) into the plumbing systems, the lines get chocked, due to which the system starts leaking at the joints. Please call the plumber to clear the obstacles in the lines and allow the water to flow smoothly.
·                     Water Lines: Originally dust in the new C.P. fittings will choke the nozzles in the fittings consequently there will not be adequate heaviness in water flowing during these fittings. Please call the plumber, who will open these fittings and clean the washers.
·                     Overhead Tanks and Sump Tanks: The fine balanced particles nearby in the water, will settle when the water is stored in tanks, due to which capability of the tanks will reduce and when the water in the lower segment of tank flows during pipes, your CP fittings will get chocked. 


No comments:

Post a Comment